Application Notes

Sulfur in Oils

Determination of Sulfur in Ore Concentrate

Sulfur in Ore Concentrate

Sulfur in Plant Tissue

Sulfur in Plant, Feed, Grain, and Flour

Sulfur in Rubber

Sulfur Determination in Rubber

Sulfur Determination in Ultra Low Sulfur Steel, Nickel, and Superalloys

Discovery of Sulfur-Containing Compounds in Broccoli with GC-TOFMS

Sulfur and Carbon Determination in Soda-Lime Glass

Determination of Surface Carbon on Aluminum Sheets/Rods/Wire

Surface Carbon on Steel Sheet and Rod Samples

A Rapid, Robust and Sensitive Analysis of Tea Tree Essential Oil Quality by GC-TOFMS with Hydrogen as Carrier Gas | Pegasus BT | 203-821-651

Thermogravimetric Analysis of Flue Gas Desulfurization (FGD)

Comprehensive Characterization of Green Leaf Tobacco Extracts Using GC-HRT

Unambiguous Pesticide Identification in Cigarette Tobacco

Temperature-Dependent Determination of Total Organic Carbon (TOC) in Soil, Rock, and Shale

Total Mercury in Industrial Waste

Determination of Total Solids in Milk

Ultra-Low Carbon and Sulfur Analysis in Steel, Nickel-Base, and Cobalt-Base Alloys

Ultra Low Nitrogen and Oxygen in Iron, Steel, Nickel-Base, and Cobalt-Base Alloys

Characterization and Comparison of Whiskey Aroma Profiles with GC_TOFMS and ChromaTOF Sync | Pegasus BT | 203-821-661

Quantification of 2,4,6-trichloroanisole to Detect Cork Taint Fault in Wine with the Pegasus BT | Pegasus BT | 203-821-517

Utilizing the Pegasus GC-HRT 4D for Improved Yeast Metabolite Characterization | Pegasus GC-HRT 4D | 203-821-502

Oxygen and Nitrogen Determination in Ferroalloys

Carbon, Hydrogen, and Nitrogen in Flour and Plant Tissue

Sulfur and Carbon in Soils

Quantitative Depth Profile (QDP) Analysis of 40 GB Hard Disk on Glass Substrate

Analysis of Boron in Low-Alloy Steel

Quantitative Depth Profile (QDP) Analysis of Commercial Hard Disk on Aluminum Alloy Substrate

Quantitative Depth Profile (QDP) Analysis of Cr Marker in Alumina Sample

Quantitative Depth Profile (QDP) Analysis of Galvannealed Steel

Analysis of Inconel 718

Analysis of Tin-Based Lead-Free Solder by LECO GDS500A

Quantitative Depth Profile (QDP) Analysis of NIST 2135c - Ni/Cr Thin Film Depth Profile Standard

Quantitative Depth Profile (QDP) Analysis of Thin Oxide Layer on Polished Stainless Steel

Analysis of Titanium Alloy (Ti-6Al-4V)

Determining the amount of carbon and sulfur in iron, steel, nickel, and cobalt alloys represents two major quality metrics for these materials. The CS844 utilizes a high-efficiency induction furnace to quickly break down these materials and allows rapid determination of carbon and sulfur. LECO Ref. #230-821-423

Two-dimensional gas chromatography (GCxGC) analysis of individual chemical components of a Citronella essential oil sample with LECO Pegasus® BT 4D. LECO Ref. #203-821-611

Determining and identifying individual analytes within a complex sample can provide important information to better understand a product or process. This exploratory analysis is readily accomplished with GC-TOFMS, as it provides non-targeted data with every acquisition. The Pegasus BT adds to the chromatographic separation by taking advantage of the full mass range data with mathematical deconvolution to further separate chromatographic coelutions. These capabilities provide excellent information about a sample and the ChromaTOF brand software contains tools to help streamline data analysis.

Gas Chromatography Mass Spectrometers are excellent tools for the analysis of essential oils (plant extracts) - the analytes of these extracts are readily separated, identified, and quantified. In this app note, Mint is analyzed. LECO Ref. #203-821-609

The gross calorific value of biomass materials is most often used when calculating the total calorific value for a biomass quantity for fuel purposes. Gross calorific values are used to calculate thermal efficiency, mass, and/or volumetric heat of combustion. The LECO AC600 Isoperibol Calorimeter can be utilized to find this value.

Decarburization can be defined as the loss of carbon from the surface of iron-based alloys as the result of heating in a medium that reacts with the carbon. The surface of decarburized steel is softer than the core, and at times it is necessary to quantify the degree of decarburization. LECO Ref. #230-821-313

Utilization of GCxGC TOF-MS to compare brand-name perfume with two drugstore imitations. Explore how the Pegasus BT 4D isolates chemical similarities and differences among the scents. LECO Ref. #203-821-597

Analysis of Cast Irons

Analysis of Stainless Steels (Corrosion and Heat-Resistant Steels)

Bulk Analysis of Tool Steels, High Speed (T & M), Hot and ColdWork (H & D)

Glow Discharge Atomic Emission Spectrometry and its performance in Accordance with ASTM E1009

Glow Discharge Atomic Emission Spectrometry and its Performance in Accordance with ASTM E415

Bulk Analysis of Fasteners Using 2 mm Lamp (Rivet, Screw and Bolt)